Jan 11

CSR Hebel Benefits

The many benefits of using Hebel PowerBlocks include:

Solid and strong:

Hebel PowerBlocks are made from Autoclaved Aerated Concrete (AAC), a strong, solid masonry building material with the advantage of being 25% the weight of conventional concrete.

Acoustic Performance: Significantly reduced sound transmission from room-to-room.

Thermal Resistance: Unique thermal properties result in a more stable inside temperature, reducing the energy required to heat and cool your home, thereby reducing energy bills.

Environmentally friendly: 73% less embodied energy and 61% less greenhouse gas emissions than comparative masonry products*. *Source: LCA Report GECA 2006.

Fire Protection: Non-combustible blocks with frameless construction deliver superior fire resistance. Hebel PowerBlock systems also allow you to build right up to your boundary line.

Pest resistance: Not a food source for termites or vermin and no cavity construction liminates the chance of harbouring pests.

Design Freedom: Hebel PowerBlock Wall Systems provide absolute freedom to design and build your ultimate dream home – without compromise.

Technical Support: Competent technical support through Hebel distributors.

Energy Efficiency

The unique combination of thermal resistance and thermal mass make building with Hebel
a smart choice for meeting Australia’s stringent building regulations.

The thermal performance of a building depends on a number of factors such as orientation and size and aspect of windows. The R-Value of walls and floors can significantly affect the energy-rating outcome of dwellings. A 250mm Hebel PowerBlock has 3 times the R-Value of a cavity brick wall (BCA Vol. 2 Figure 3.12.1.3). The use of Hebel in walls and floors will provide increased thermal performance that can allow more

flexibility with other design aspects of a building.

The thermal efficiency of Hebel systems will also reduce the reliance on heating and cooling appliances. The combined effects of running a heater less in winter and fans or air conditioning less in summer can have a big impact on energy costs and the environment.

Single Skin Construction

The AAC masonry constructed from Hebel PowerBlock products is called “Plain Masonry” and the blocks are masonry units referred to as a “Solid Unit”. The type of solid unit is “Autoclaved aerated concrete masonry unit” complying with AS/NZS 4455 – Masonry Units and Segment Pavers.The larger face dimension and being a single skin, Hebel PowerBlock walls are erected quickly when compared to double brick construction.

Hebel PowerBlock homefind out more

 

Jan 09

CSR Hebel PowerBlock Handling

Manual Handling

To minimise the possibility of manual handling injuries, Hebel suggests the following:

  • Use mechanical aids, such as trolleys, forklifts, cranes and levers, or team lifting to move Hebel.
  • Keep the work place clean to reduce the risk of slips, trips and falls, which can cause injury.
  • Plan the sequence of installation to minimise panel movements and avoid awkward lifts.
  • Good lifting techniques to be adopted to minimise the risk of injury.

Mechanically Assisted Handling

Moving and handling Hebel Floor panels and Hebel Lintels should be done using mechanical aids such us forklifts, cranes and special panel lifting trolleys. Different panel lift attachments are available for installing panels. For purchasing or hire of these devices please contact CSR Panel Systems.

Health, Safety & Personal Protective Equipment (PPE)

Hebel AAC products are cement-based, which may irritate the skin, resulting in itching and occasionally a red rash. The wearing of gloves and suitable clothing to reduce abrasion and irritation of the skin is recommended when handling Hebel AAC products.

Approved respirators (AS/NZS1715 and AS/NZ1716) and eye protection (AS1336) should be worn at all times when cutting and chasing. Refer to the Hebel Material Safety Data Sheets (MSDS).

For further information contact CSR Panel Systems or visit the website: hebelaustraliacom.au.

Cutting

The use of power tools when cutting masonry products may cause dust, which contains respirable crystalline silica, with the potential to cause bronchitis, silicious and lung cancer after repeated and prolonged exposure. When using power or hand tools, on Hebel products, wear a P1 or P2 respirator and eye protection. When cutting, routing or chasing Hebel products with power tools, use dust extraction equipment and wear appropriate hearing protection. Refer to the appropriate Hebel MSDS.

For further information, contact CSR Panel Systems or visit the website: hebelaustralia.com.au
Reinforcement exposed during cutting is to be coated with a liberal application of Hebel corrosion protection paint.

find out more

Jan 09

CSR Hebel Delivery and Storage

PowerBlock  Delivery

PowerBlock pallets should be unloaded and moved with only approved lifting devices. Before use, the lifting devices should be checked for the required lifting tags. PowerBlock pallets should be unloaded and stored as close to the intended installation area as possible. This will increase work efficiency and minimise the need for secondary lifting.

It is good practice to inspect the delivery for damaged blocks. Unnecessary handling will increase the risk of damage to the Hebel® PowerBlocks.

Care should be taken when cutting the packaging straps, blocks may come away and cause injury or become damaged.

TIP – When a block is damaged it may be possible to cut away the damaged section and use the remaining portion in the wall.

Storage

All materials must be kept dry and preferably stored undercover. Hebel® PowerBlocks should be left on their pallet until they are required. Place the pallet on a level and stable surface. The project engineer should be consulted as to the adequacy of the structure to support Hebel® PowerBlocks if they are not stored directly on the ground or concrete slab.

find out more